10 min read
This blog post discloses the evolution of ideas and is not just the presentation of the final result. The latest draft of JSON Home published on 24 November is not covered. Note: I’m just on the way to understanding REST.
As HATEOAS is a constraint in REST and not an option  designers and implementors of RESTful APIs should have a look at JSON Home . JSON Home - in it’s primary design goal - is a resource centric standard draft.
In a current project we have established a RESTful API for trans system data replication and - consequently - implementing JSON Home as a lookup mechanism for resources was on our roadmap.
So far, so good. However, Topic Mappers like me and the Semantic Web people in general are always asking for the subject(s) indicated / represented / identified by a web resource’s representation (see the difference between resource and representation in RFC 7231). I will use represented in the following to keep things easy.
A generic definition of subject can be found in the Topic Maps Data Model:
"A subject can be anything whatsoever, regardless of whether it exists or has any other specific characteristics, about which anything whatsoever may be asserted by any means whatsoever. In particular, it is anything about which the creator of a topic map chooses to discourse." 
The basic idea I would like to sketch out in the following is how to use JSON Home to enable clients to get an idea about the subjects represented by the resources’ representations in question.
In my opinion, this would add substantial benefit to JSON Home as "follow your nose"  could be improved or even replaced by an I know why I follow-approach.
JSON-LD is a serialization of RDF. RDF enables authors to identify subjects (by using resources and representations as intermediates!) and make statements about them using triples constituted by subject-predicate-object. However, by subject I still refer to the definition given above.
Having RDF at hand a connection to the semantic web stack is established.
The simple and obvious task is how to connect JSON Home and JSON-LD?
The latest draft of JSON Home provides two hints sections to add further information:
1. Resource Hints
2. Representation Hints
In order to be able to disclose information about the represented subjects we could add a third section:
3. Subjects Hints
The internet media type identifier tells clients which model is used to disclose subjects semantics. Example:
A more sophisticated approach could provide more information about the chosen representation. Example:
The key body holds the actual statements / data.
Both approaches allow the integration of n models.
But wait, let’s examine what has happened so far: I have mixed two mediatypes, i.e.
application/ld+json. The resource’s representation in question is in a media type dilemma. Declaring both media types is no option as RFC 7231 simply does not allow assignments of more than one media type in the Content-Type header. Good bye, RESTfulness.
Last but not least, the bridge property - subjects-hints - introduces vocabulary which isn’t fixed in any global registry and / or in the standard (yet).
In a quick thought I wondered if JSON namespaces would help (and stumbled upon https://www.mnot.net/blog/2011/10/12/thinking_about_namespaces_in_json). But this doesn’t solve the media type dilemma. An aspect that I miss in the discussion in Mnot’s blog post (or I missed the point).
The new simple and obvious task is to separate JSON Home and JSON-LD and make the JSON-LD accessible via JSON Home.
Basically, what I really want to do is to establish a lookup mechanism for subjects while JSON Home is a lookup mechanism for resources. Consequently, the JSON-LD should reside at the base URI - as a "Home JSON-LD" - side by side with the JSON Home document. I.e. I want the resource identified by the base URI to represent (at least) these two desired states .
This is easily done by content negotiation which realizes the separation:
GET / HTTP/1.1
GET / HTTP/1.1
The second part of the task is to make the JSON-LD accessible via JSON Home as the lookup of resources is the starting point for clients.
The initial approach sketched out above introduces new vocabulary in JSON Home: subject-hints
The idea was to attach pieces of JSON-LD to the particular resources which - in turn - requires JSON-LD to specify JSON pointer  as its fragment identifier syntax, though.
Extending the standard this way feels cumbersome somehow. Looking still deeper at the conceptual basis, the attempt is to
• Separate the subjects space from the resources space,
• As a meta layer,
• And make the subjects space accessible from the resources space.
I.e. the separation is still more conceptual than technical. As the subjects represented in the JSON-LD are about the domain space, the resources published in JSON Home will also occur in the JSON-LD. But with a specific purpose related to the subject in question.
E.g. in Topic Maps there is a precise classification / distinction of purposes:
locator that refers to a subject indicator
information resource that is referred to from a topic map in an attempt to unambiguously identify the subject represented by a topic to a human being
locator that refers to the information resource that is the subject of a topic" 
Given the URI
http://example.org/people/John-Doe this is just a resource in a JSON Home document enriched by technically motivated hints. However, from the subjects perspective, a certain real Mr. John Doe may be a subject of interest and
http://example.org/people/John-Doe may act as a subject identifier referring to a subject indicator. This is all well defined in Topic Maps which serves as a reference implementation for subject identification here. The JSON-LD document then contains further statements about the subject Mr. John Doe using RDF triples which constitute the subjects space. This is semantically motivated information.
Let’s talk about an example.
A very popular vocabulary widespread on the web and therefore - for short - hypothetically attributed with a certain quality of common understanding is schema.org. Please refer to http://schema.org for further information.
We find some inspiring examples in the schemas section, e.g. for the type “Person”:
20341 Whitworth Institute
Seattle WA 98052
Jane's home page:
Bob Smith 
Let’s imagine we want to build a RESTful API to access public data about the staff and students of a university where Prof. Jane Doe is a guest lecturer. The basic design of the API consists of indexes (of the university people, i.e. staff / employees and students) represented as lists of hyperlinks to the people’s homepages, and items which are the people’s homepages.
Since REST is not about nice URIs , parsing the URIs and / or the URI patterns in our API’s JSON Home for meaningful strings fails; we have chosen arbitrary generated URIs. E.g. the URI
http://example.org/indexes/foobarbaz identifies the index of the employees.
I guess you are getting the idea. We would establish a JSON-LD representation which discloses information about the involved subjects, the Whitworth Institute and its employees:
"name": "Whitworth Institute",
"streetAddress": "20341 Whitworth Institute 405 N. Whitworth"
The property url is specified as "URL of the item" . Unfortunately, this is just vague semantics.
There is no guarantee that all resources from JSON Home reappear in the "Home JSON-LD". It is the author’s choice to determine the resources coverage as well as the richness and number of statements about the subjects. However, "Home JSON-LD" would impose on authors to set the url property for each subject which acts as a wormhole between JSON Home and "Home JSON-LD".
This is the subjects space. Based on shared semantics (in / via the established properties), clients can pick resources of interest from "Home JSON-LD" and retrieve access information from JSON Home afterwards (or vice versa). Little effort is required to map the string property url to the corresponding resource object.
I know that this is a naive approach; the connection between "Home JSON-LD" and JSON Home is not a sound one. URIs could change, and authors might forget to update the JSON-LD. Using the link relation types in JSON Home which allow custom relations like “
tag:email@example.com,2016:widgets”  would be a far more stable mechanism.
Finally, I like the idea of a "Home JSON-LD" which is retrieved via the Base URI using content negotiation. Using a special resource in JSON Home requires a corresponding special link relation which discloses the specific "Home JSON-LD" semantics. This relation has to be registered and established (or the other way round) first. However, we should use the whole bandwidth of existing standards first before extending them. This is always a useful design goal.
Musing about “Home JSON-LD” is another story.
 https://schema.org/Person, Example 8